Express Program For Heat Exchanger Tubes
As the result of a new heat exchanger express hollows program, Alleima’s customers in Europe, Middle East, and Africa (EMEA) can now rest assured. It means EMEA customers who urgently need to replace heat exchanger tubes can get them in just eight weeks from order placement.
Corrosion Protection of Process Vessels by Galvanic Anodes
The Cathodic Protection designing of process vessels is difficult and critical due to enclosed and extreme electrolyte conditions of non-ambient temperature, pressure, velocity, chemical compositions and hazards to the environment.
Alleima Completes State-Of-The-Art Heat Exchanger Tube Facility In Mehsana, India
Alleima officially launched its state-of-the-art heat exchanger facility in its mill located in Mehsana, Gujarat.
Pipe & Steel Industrial Fabricators Plans $4.3 Million Expansion
In addition to technology and equipment upgrades, the expansion will add 8,000 sq. ft. to the existing structural steel shop, 14,000 sq. ft. to the current pipe fabrication facility, and a permanent covered blasting and painting area.
Solid-Carbide Mill Cuts Deep Pockets and Cavities
The cutting tool was specifically designed for finishing and dynamic roughing of deep pockets and cavities.
Milling Cutters Provide High Performance In Stainless Steels
In the DSHPR line, all tools are available with four teeth and in diameters from 2 mm to 20 mm. The DSR variant has three teeth in diameters from 1 mm to 10 mm.
Do Not Miss Out on the Fugitive Emissions Summit Americas Conference!
This year’s conference will offer concurrently running Panel Discussions in both the morning and afternoon sessions.
Heat Exchanger World Americas 2023: A Resounding Success!
The success of the Heat Exchanger World Americas Expo & Conference would not have been possible without the dedication and support of our sponsors, panelists, and presenters. We extend our heartfelt thanks to each one of them.
Bolt Selection and Coating Options
However, the bolt material of construction and type/class must still be determined. Regarding strength, the bolts must be strong enough to compress the gasket sufficiently to create a seal without breaking or deforming.
The Hottest Event of the Year is Back- The Heat Exchanger World Americas Conference!
It is officially Day Two of the Conference, and this dynamic event kicks the day off with keynote presentations that speak to the driving contributions of the energy transition, key innovations, and adopting new technologies.